CYTVII-B-E-1M-SK Evaluation Board Quick Start Guide, Doc. # 002-25315 Rev. **
6
2.
Firmware Usage
This chapter explains the operation of pre-installed firmware
.
2.1
Startup Firmware
1. Connect the PC and the target and start the terminal software.
2. On the terminal software, select the port this board is connected to.
3. Set the line feed code to LF only Receive Side.
4. Set the baud rate as 115200.
5. Press the reset switch to display the menu.
See
CYTVII-B-E-1M-SK Evaluation Board User Guide
about reset switch location.
