CY5670 CYSMART
TM
USB DONGLE
© 2015 - 2017 Cypress Semiconductor Corporation. All rights reserved.
All trademarks or registered trademarks referenced herein are the
properties of their respective owners. 001-96029 Rev.*E
Step 1:
Plug the CySmart USB Dongle into a Windows PC.
Step 2:
Test and debug BLE devices using CySmart.
The CySmart USB Dongle is factory-programmed to work as a BLE GAP Central
device, allowing you to debug BLE applications such as those implemented using
the CY8CKIT-042 BLE Pioneer Kit.
Detailed instructions for using the dongle with the CySmart tool are available as a
part of the CySmart User guide. Visit
www.cypress.com/CySmart
For details on how to use this dongle with other Cypress BLE kits, visit its webpage
at
www.cypress.com/CY5670
Refer to the kit user guides on the website for detailed information.
CY5670 has been pre-compliance tested against regulatory standards for countries
including USA (FCC), Canada (IC) and Japan (JRF/TELEC).
For more information about this kit, visit
www.cypress.com/CY5670
Fig-2: Powering the CySmart USB Dongle
Fig-3: CySmart Windows
