BLE Indoor Positioning with PSoC
6 MCU with BLE Connectivity
Document No. 002-17647 Rev.**
3
Figure 1. CySmart BLE Dongle Selection
Note:
If the dongle firmware is outdated, you will be alerted with an appropriate message. You must upgrade the firmware before
you can complete this step. Follow the instructions in the window to update the dongle firmware.
d. Select
Configure Master Settings
and then click
Restore Defaults
OK
.
Figure 2. CySmart Master Settings Configuration
e. Set the
Duplicate
Filter Policy = Disable duplicate filtering
in the
Master Configuration > Scan parameters
