QUICK START GUIDE
CY3641 PROGRAMMING KIT
© 2017 Cypress Semiconductor Corporation. All rights reserved.
All trademarks or registered trademarks referenced herein are the property of their respective owners.
002-18660 Rev.*A
CY3641 Board Details
Table: Jumpers Default Position
• CY3641 comes with two SMA connectors,
which could be used to measure clock
parameters of the programmed part
• Please refer Section 5 Additional Features
of CY3641 in the Kit Guide for details
Main Power Supply Jumper (J1)
Power LED
Pin1
Termination
Jumper (J5)
Differential
Clock Output
Socket for 8-pin LCC 7mm x 5mm
* Component is on the bottom-side of the Programming Board
USB Mini-B
Connector
Status LED
PSoC 5LP
(CY8C5868LTI-LP039)*
Purpose
Power on CY29412
Jumper
J1
Default
Position
1 - 2
1 - 2
Termination voltage set to GND
J5
3
