Operation Controls and Functions
Front Panel
1. Input video system indicator
AUTO, N3, N4, PAL, PAL M, PAL N, SECAM
1. Illuminates when input auto detection mode is selected.
2. Illuminates when input system is set to NTSC 3.58.
3. Illuminates when input system is set to NTSC 4.43.
4. Illuminates when input system is set to PAL (BDGIK).
5. Illuminates when input system is set to PAL M.
6. Illuminates when input system is set to PAL N.
7. Illuminates when input system is set to SECAM.
Note: When in auto detection mode one of the system indicator will also
illuminate to show vieo system of the input.
2. Picture adjustment controls:
1. Select: Press this button repeatedly to choose the picture adjustment you
wish to do.
Each depression of the button will toggle through adjustment
controls as follows:
System
Contrast
Brightness
Color
Tint
Sharpness
2. : Press the button for adding picture effects value.
3. : Press the button for reducing picture effects value.
4. Reset: When pressing reset button, the setting of the selected control will be
reset to its default value.
Press reset for over 3 seconds, all controls will be reset to their default
values.
Auto/Manual detection mode: Press the " Select " button to choose " System"
function on the top row LEDs. And then press Reset button to switch between
Auto and Manual detection mode for the input.
+
+
-
2
2
1
3
Tint
Colo
r
Bright
Cont
rast
System
A
S
PN
PM
Sharpness
P
N4
N
Select
Reset
+
-
Multi-system Time Base Corrector
1
A
S
PN
PM
Sharpness
Tint
Color
P
N4
N
Bright Cont
rast
System Select
Reset
+
-
2
3
CTB-100G
CTB-100
