Installation
Power up the unit:
1. Plug the power jack into the power socket on the back of the unit,
the power LED will illuminate in red color(Standby mode).
2. Press the power button, power LED will turn into green light.(operation mode)
3. Press the power button again will return to standby mode.
4. When the unit first powered up the default input to the unit is TV(RF) input.
When you changed input source and later power down the unit the last input
source you selected will be memorized by the unit. When you re-power the
unit the memorized input will be recalled as input source.
OSD operation:
1. After power- on the unit. Press the Menu button will bring up the main menu
page to your screen as bellow:
MAIN MENU
CHANNEL SETUP
PICTURE ADJUSTMENT
OUPTUT FORMAT
MTS
OTHER
EXIT
2
3
4
5
6
Close OSD
Hight-light bar
Selected
parameter
Use channel
ST
to move up or move down high-light bar to your desired parameter.
Press MENU/ENTER to confirm your selection.
To adjust the setting value of your selected parameter,press to increase
the value. Press volume - to decrease the value.
7
