1. Introduction
This converter box converts digital HDMI to Analog PC or SD/HD output. It
enables to connect the HDMI sources to the analog PC monitor, Projector or
TV. Its high bandwidth capability supports a wide range of PC and HDTV
resolutions.
2. Features
Supports HDMI input and Analog PC or SD/HD output.
Supports output selection between YPbPr and RGB.
Supports input/output resolution as below:
PC: 640x480= VGA59 , VGA60, VGA72, VGA75, VGA85
800x600= SVGA56, SVGA60, SVGA72, SVGA75, SVGA85
1024x768= XGA60, XGA70, XGA75, XGA85
1152x864= MAC70, MAC75, MAC85
1280x800=
WXGA60
1280x1024= SXGA60, SXGA75, SXGA85,
1440x900=
WXGA60
1600x1200=
UXGA60
1680x1050=WSXGA+60
1920x1200=
WUXGA60(pixel-rate=154MHz)
HD: 480I60, 576I50, 480P60, 576P50, 720P60, 720P50, 1080I60, 1080I50,
1080P60,
1080P50
Note:
①
As component output at 720p/1080i/1080p needs Tri-level
synchronisation in order to allow the image to be display properly.
This device supports only bi-level synchronisation and therefore,
when output component timing at 720p/1080i/1080p some display
may shift to the left side of the screen. This is due to the incorrect
start counting point.
②
If HDMI source includes HDCP(High-bandwidth Digital Content
Protection), output display is not supports HDCP decryption and
no image will display.
Built in EDID.
HDMI 1.3, HDCP 1.1 and DVI compliant.
Note: This product does not process HDCP input. When receiving content
that has HDCP encyuption there will be no video output.
1