7. Operation Controls and Functions
7.1 Front Panel
CMLUX-4H4CAT
HDMI V1.3 to CAT6 4X4 Matrix
POWER
1
2
3
4
HDCP HDMI/DVI
1
2
3
4
HDCP HDMI/DVI
1
2
3
4
HDCP HDMI/DVI
1
2
3
4
HDCP HDMI/DVI
IN
IN
IN
IN
A
B
HDMI OUT
C
D
①
②
③
④⑤
①
. Remote control sensor.
②
. Power switch & LED Indicator: This LED will illuminate when the power is
turned on.
③
. Input Select/Indicators (A/B/C/D): Repeatedly press each “HDMI out”
button to switch to your desired source. The LED that turns on will indicate
which input source is being selected and routed to the HDMI A display.
④
. HDCP indicators: This LED will illuminate once the input source being
played comes with a HDCP protection.
⑤
. HDMI/DVI indicators: When the input source has HDMI content, this LED
will turn on. When the input source has DVI content, this LED will not turn on.
7.2 Rear Panel
CAT6 OUTPUT
HDMI INPUT
IR OUT
STD
TV
DDC
VIDEO
EDID
4
3
2
1
4
3
2
1
DC 5V
D
DDC
VIDEO
C
DDC
VIDEO
B
DDC
VIDEO
A
IN
OUT
IR MAIN
RS-232
③
④
⑤
⑥⑦⑧
① ②
①
. EDID Control Switcher: The default factory setting is TV, leave as is when
content is displayed properly. Switch to STD to use built-in EDID.
Note:
1. When EDID is switched to TV, the unit will detect the
fi
rst HDMI output
source’s EDID and record it in the unit. If the
fi
rst detected output
source is DVI, it will skip onto the next source until the
fi
rst HDMI source is
detected. The detection priority is HDMI v1.3 > HDMI v1.2 > DVI.
2. When EDID is switched to STD, the unit will use its built-in EDID that
supports:
Video
→
1080p 12-bit (max) supports xvYCC
Audio
→
PCM 2CH
3. The EDID selection will only be activated after the unit is re-plugged
and powered on.
4
