4
2
HDMI OUT
3
HDMI OUT
4
HDMI OUT
5
HDMI OUT
6
HDMI OUT
EDID
STD
TV
1
2
SYS.Reset
ON
OFF
3
6. Operation Controls and Functions
6.1 Front Panel
①
HDMI OUT 1/7/8:
Connect each of the output ports to the HDMI display.
When more than one output connected, the HDMI outputs play identical
video signal simultaneously.
②
SYNC LED: The LED will illuminate when the HDMI source signal is
connected to the input port.
③
HDMI IN: Connect input port to the HDMI or DVI output of your source
equipment such as DVD player or set-top-box.
④
POWER LED: The LED will illuminate when the power is connected.
⑤
DC 5V: Plug the 5V DC power supply into the splitter and connect the
adaptor to AC wall outlet.
6.2 Rear Panel
①
EDID: Default factory setting is TV, leave as is if the display is properly.
Switch to STD to use build-in EDID if the display has problems. When the
EDID control switch in TV selection, the unit will detect the first HDMI output
source’s EDID and record in the unit. If the first detected output source is
DVI it will pass to next source, until the first HDMI been detected
Note: EDID Control switch will be valid when re-power on the unit.
②
HDMI OUT 2~6:
Connect each of the output ports to the HDMI display.
When more than one output connected, the HDMI outputs play identical
video signal simultaneously.
③
SYS Reset: Switch to “ON” stage, the system will send the internal CEC
Command to the display within 8~10 minutes to force all the displays
switch to HDMI 1 port. Meanwhile, the source CEC Command will not
functional to the system. When switch to “OFF” stage, the system reset
function will terminate.
