Cypress CIR-03, Operation Manual

Page: 5 / 12

1. Introduction
The IR Extender and the Repeater Box are two perfect devices for controlling
source equipments over long distance. Through the built-in IR receiver of
IR Repeater and CAT5 cable, users are able to control up to five source
equipments at the same time that can reach up to a distance of 250 meters
with existing remote controls. There is no space limitation with the devices,
which means even if the source equipments are placed in a different room
or different floor from the display, the performance stays the same. The IR
extender and the repeater box grant users a great convenience, allow users to
control and display their desired source instantly. If however, users only wish to
control the sources within a room area then the IR Repeater Box will be enough
to control up to 2 sources.IR Extender Box is design for long distance and extra
sources control over IR Repeater Box.
2. Applications

TV exhibitions at consumer electronic stores

Home theater installation

Lecture room display

Home entertainment
3. Contents

Infrared Extender Box (CIR-03)

Infrared Repeater Box (CIR-12)

1pc IR Eye Receiver cable (CIR-12)

5pcs IR Eye blaster cables (3pcs for CIR-03, 2pcs for CIR-12)

1pc 5V DC power supply adaptor (for CIR-12)

Operation Manual
4. System Requirement
Input source equipments connected with output displays through CAT 5 cable.
5. Features

Support five(5) outputs (3 from CIR-03, 2 from CIR-12).

Control source equipments anywhere within 250 meters, piercing through
walls and ceilings.

Transmits infrared signals only.

It allows the use of existing remote controls.

Only one IR Receiver is needed.

IR Receiver's frequency is at 20~60 KHz.
1