Connection and Installation
The AC adaptor power unit should not be plugged into a wall outlet until all connections
are complete.
-
Using your connector cable connect the output (Number 5 on the rear panel) to your
output device (NTSC or PAL Video Recorder or TV).
-
Using your connector cable connect your input (Number 2 on the rear panel) to the
input device (Video cassette recorder either- PAL, NTSC or SECAM, satellite
receiver or a camcorder).
-
Choose either Auto or Manual as your input detecting mode switch. When in M-mode
(manual), set the switch to match the actual input signal type. (PAL, SECAM, NTSC
3.58, NTSC 4.43).
Once all connections are complete please connect the power supply provided to the
power socket (number 7 on rear panel).
Specifications
Input TV systems
NTSC 3.58, NTSC 4.43, PAL, SECAM
Output TV systems
NTSC 3.58, PAL (B, D, G, I)
Connection terminals
Video Input: 1
Video Output: 1
Sampling frequency
Y: 14.318 MHz
R-Y: 7.159 MHz
B-R: 7.159 MHz
Digital Cord Bit
Y: 8 bits
R-Y: 8 bits
B-R: 8 bits
Line Conversion
525-625 lines
Field Conversion
60-50 fields
Power Supply
DC 15 Volts 450 mA
Dimensions
(W) 236 mm X (D) 130 mm (H) X 45 mm
Weight
600g
Accessory
One set of video/cable, AC adaptor
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NSW, 2304 Australia,
Phone +61 249689313 Fax +61 249689314
www.converters.tv
