1 Connect one of the power adaptors to Active Connect multimedia
Transmitter Box and plug in the power. May also plug the other adaptor to
Active Connect Multimedia Receiver Box.
2 Switch the power selection on Active Connect Multimedia Receiver Box
to INT without adaptor connection or EXT and connect the other adaptor
with plug in power. (Suggest using external power supply when long
distance cables are used).
3 Connect your HDMI input device (Blue-Ray DVD or PS3) to Active Connect
Multimedia Transmitter Box with HDMI cable (Suggest to use HDMI cable
under 1M for quality performance).
6. Installation
Please follow the step-by-step instruction below to install your Active Connect
Multimedia Transmitter and Receiver Box.
1
DC 6.5V
LINK
HDMI INPUT
CAC-TX
HDMI 5 COAX TX
7
3
LINK
HDMI OUTPUT
CAC-RX
HDMI 5 COAX RX
DC 6.5V
POWER
EXT INT
1
7
6
2
R
G
B
CLK
PWR
4 5
4 Connect BNC-F connectors to both sides of the 5 cables.
5 Connect RGB, Clock, and Power with 75Ω cables accordingly to Active
Connect Multimedia Transmitter and Receiver Box. MAKE SURE TO
CONNECT RIGHTLY ACCORING TO THE INSTRUCTION. (Suggest using no
longer than 100Ms cables for 1080P/8bit’s resolution and 75Ms cables for
1080P/12bit’s resolution)
6 Connect HDMI output device (LCD TV or HDMI monitor) to Active
Connect Multimedia Receiver Box with HDMI cable (Suggest to use HDMI
cable under 1M for quality performance).
7 Link’s green led light will light up when all connection is rightly connected
and power on.
3
