Bluetooth Low Energy Current Consumption Measurements
www.cypress.com
Document No. 002-14934 Rev. *C
18
6.2
Scan Mode
The devices in scan mode look for advertisers to setup a connection. This is an example of a non-connected
mode.
1. Launch the Cypress BlueTool software.
2. From the Transport menu, select
HCI Control
or enter
CNTL+1
.
3. In the HCI Control window, select
0: Vendor-specific Commands (0 key)
from the list.
4. Select
Set_Sleepmode_Param
from the menu.
5. In the
Set_Sleepmode_Param
window, select
UART
from the Sleep_Mode list. Ensure that the
BT_WAKE_Active_Mode is set to
Active Low
, and click
OK
.
