© 2011-2012 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered
trademarks referenced herein are the properties of their respective owners. Doc #: 001-65531 Rev. *C
http://www.cypress.com/go/CY8CKIT-025
For the latest information about this kit, visit
PS
O
C
®
PRECISION ANALOG TEMPERATURE SENSOR EXPANSION BOARD KIT
QUICK START GUIDE
Board Setup
1. Connect the thermocouple at connector J2.
2. Connect jumper wires on pins 3, 4 and pins 7, 8
of J4 for diode measurement.
3. Connect 2N3904 transistors at connector J4 for
diode measurement.
Connect with PSoC 3/PSoC 5 Development Kit
1. Connect the CY8CKIT-025 Expansion Board Kit to
Port E of the CY8CKIT-030 PSoC 3 Development
Kit/ CY8CKIT-050 PSOC 5 Development Kit.
2. Power the CY8CKIT-030/ CY8CKIT-050 by
connecting the USB cable at J1.
Program the PSoC Device
1. Open TempSense_030_050.cywrk from
PSoC
Creator Start Page > Examples and Kits > Kits >
PSoC Precision Analog EBK 2.1
.
Use TempSense_001 for CY8CKIT-001.
2. Click the
Program
icon in PSoC Creator.
3. Press Reset button on board to restart the kit.
Test the Expansion Board Kit
1. LCD shows the temperature reading.
2. Use the P5_5 and P5_6 CapSense buttons on
CY8CKIT-030/ CY8CKIT-050 to select
temperature display of different sensors. Note:
For CY8CKIT-001, use the
P0_5
and
P0_6
CapSense buttons.
3
4
5
6
