3 – 64
© 2018 Cyphre Security Solutions, LLC.
3.14 Reinstalling the Appliance Cover
The appliance cover has four slide-lock pins, two per side. Carefully place them in their respective
slide-lock slots. See the figures below.
Figure 3 - 48: Cover Lock-pin Detail
Figure 3 - 49: Slide-lock Slots Detail
Note:
Ensure the pins do not bind against the slide-lock slots. The
slide-locks could bend and cause damage to the pins.
Note:
DO NOT brace the appliance by pushing against the hard drive
assemblies.
Sl
ide
-lo
ck
Pi
ns
Slid
e-lo
ck
Slo
ts
Figure 3 - 50: Reinstalling the Cover
To reinstall the appliance cover:
1.
Carefully place the cover on the appliance enclosure.See Figure 3 - 50: -
2.
Ensure the four cover slide-lock pins align, two on each side. The front edge of the cover
should be about 3/4 inch (19.05 mm) open.
Confidential
BT1 Security Appliance User Guide
3 BT1 Installation
