CYP SY-PT385A, Operation Manual

Page: 7 / 11

3
6.3 Side Panel
NTSC PAL
1
1
NTSC/PAL Switch
Switch the output display image between NTSC or PAL system. The
$ %##
and position and while adjusting the power LED will blink.
Note:
Source input signal must have a full screen image in order to
allow the auto adjustment function to perform successfully.
6.4 Top Panel
POWER
1
1
POWER & LED
Press this button to switch ON the device and the LED will illuminate
in green or set it to standby mode and the LED will turn red.