
10
6.2 Transmitter's Rear Panel
DC 12V
LAN
USB
RS232
AUDIO IR OUT IR IN
DP IN
HDMI IN
SFP+
2
1
3
8
4 5 6
7
9
10
1
DP IN:
Connect to DisplayPort source equipment such as a PC or
laptop.
2
HDMI IN:
Connect to HDMI source equipment such as a media player,
game console or set-top box.
3
SFP+:
Connect a standard SFP+ module to allow data transmission
over optical fiber to a compatible Receiver.
Note: Single-mode and multi-mode support is dependent on the SFP+
modules used. Simplex SFP+ modules must use different wavelengths for
each end (e.g. 1330/1270nm).
4
AUDIO IN:
Connect to the stereo analogue output of a device such as
a CD player or PC.
5
IR OUT:
Connect to the provided IR Blaster to transmit IR signals to
devices within direct line-of-sight of the IR Blaster.
6
IR IN:
Connect to the provided IR Extender to extend the IR control
range of remotely located devices. Ensure that the remote being used
is within direct line-of-sight of the IR Extender.
7
RS232:
Reserved for future use.
8
LAN:
Connect to an Ethernet supporting device or to your local
network as appropriate to extend the network between the
Transmitter and Receiver.
9
USB:
Connect directly to a PC to extend its USB functionality to the
port on the connected Receiver.
10
DC 12V:
Plug the 12V DC power adapter into this port and connect it
to an AC wall outlet for power.
Summary of Contents for SDV-FRX
Page 1: ...OPERATION MANUAL SDV FTX FRX Ultra HDMI 4K 60 over Fiber extender...
Page 2: ......
Page 23: ......