Page 3
3.2 Rear Panel
1. EDID Control Switch: Default setting is TV (downstream). In this mode the
QU-210S will search all output ports (starting at output 1) for the highest
video/audio settings connected to each of the outputs. The detection priority
of the matrix is v1.3 HDMI, v1.2 HDMI, DVI. Switch to STD (fixed EDID) if
you have any issues with the default setting (TV). When switching to STD,
please ensure that the unit is powered OFF, then ON again, for the setting to
be made. By changing to STD, this will force the source to be configured as
standard stereo (PCM) Audio and initiate a search for a common compatible
video resolution.
2. RS-232: 9-Pin D-sub connection for connecting your PC or other RS-232
Control based console for remote operation.
3. HDMI Inputs 1 and 2: Connect input ports to the HDMI or DVI output of your
source equipment such as a Blu-Ray player or set-top box.
4. HDMI Outputs 1 to 10: Connect each of the output ports to the HDMI display.
When more than one output is connected, the HDMI outputs play an identical
video signal simultaniously.
5. POWER: Plug the 5V DC power supply into the splitter and connect the
adaptor to the AC wall socket.
DC 5V
RS-232
1
2
1
2
3
4
5
6
7
8
9
10
EDID
STD TV
HDMI OUT
HDMI IN
1
3
4
5
2
