CYP PUV-3050RX-UA, Operation Manual

Page: 8 / 20

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
AUDIO IR
IN
OUT L
R R PWR T
AUDIO BYPASS
EXTRACT LINK
2
1 3 7 8
4 5 6 9
PUV-3050RX-UA
1 AUDIO IN 3-pin Terminal Block:
Connect to the analogue audio
output of a device such as a media player or game console using a
3-pin adapter cable. Audio is sent to the analogue audio output on
the connected compatible receiver.
2 AUDIO OUT 3-pin Terminal Block: Connect to powered speakers or
an amplifier for analogue audio output using a 3-pin adapter cable.
Audio is sourced from the analogue audio input on the connected
compatible receiver.
3 RS-232 4-pin Terminal Block:
Connect to a PC, laptop, or serial
controllable device with a 4-pin adapter cable for the extension of
RS-232 signals between both ends of the HDBaseT connection.
4 IR 4-pin Terminal Block (In/Out):
Connect to both an IR Blaster and
Extender using a 4-pin Y-adapter cable to transmit and receive IR
control signals and extend them to devices connected to the other
end of the HDBaseT connection.
5 USB 2.0 Ports (Type-A):
Connect directly to standard USB devices
such as a mouse, keyboard, or flash drive to extend their USB
functionality to the currently active Micro-USB host port.
6 AUDIO Button:
Press this button to toggle the connected
transmitter’s analogue audio stream source between the analogue
audio input (bypass) and the HDMI input’s audio (extract).
Note: HDMI audio extraction is only available with LPCM 2.0 sources. This
feature requires connection to a fully compatible transmitter.