3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
IR
R PWR
T
LINK
PUV-3000TX
UHD
+
HDMI over HDBaseT
Transmitter
2
4
1
3
1
RS-232 4-pin Terminal Block:
Connect to a PC, laptop, or serial
controllable device with a 4-pin adapter cable for the extension of
RS-232 signals between both ends of the HDBaseT connection.
2
IR 4-pin Terminal Block (In/Out):
Connect to both an IR Blaster and
Extender using a 4-pin Y-adapter cable to transmit and receive IR
control signals and extend them to devices connected to the other
end of the HDBaseT connection.
3
Power LED:
This LED will illuminate to indicate the unit is on and
receiving power.
4
LINK LED:
This LED will illuminate solidly when a live connection with
a compatible receiver is active.
