CYP PUV-2100RX-AVLC, Operation Manual

Page: 9 / 20

9
6.2 Rear Panel
LAN HDMI OUT CAT5e/6/7 IN IN OUT IN OUT
RS-232
BYPASS
IR OPTICAL
1 2 3 4 5 6
1 RS-232 BYPASS Port: Connect to a PC, laptop or serial controllable
device for the extension of RS-232 signals between both ends of the
HDBaseT connection.
2
IR OUT Port: Connect to an IR Blaster to transmit IR signals from the
other end of the HDBaseT connection to devices within direct line-of-
sight of the IR Blaster.
IR IN Port: Connect to the provided IR Extender to extend the IR
control range of devices connected to the other end of the HDBaseT
connection. Ensure that the remote being used is within direct line-of-
sight of the IR Extender.
3
OPTICAL OUT Port: Connect to powered speakers or an amplifier
for digital audio output using an appropriate optical cable. Audio is
sourced from the Optical Audio Input port on a connected compatible
Transmitter.
OPTICAL IN Port: Connect to the optical audio output of a device
such as a media player or game console using an appropriate optical
cable. Audio is sent to the Optical Audio Output on a connected
compatible Transmitter.
4 CAT5e/6/7 IN Port: Connect to a compatible HDBaseT Transmitter
with a single Cat.5e/6/7 cable for transmission of all data signals.
48V PoH will also be supplied when connected to a compatible PSE
Transmitter.
5 HDMI OUT Port: Connect to an HDMI TV, monitor or amplifier for
digital video and audio output.
6 LAN Port: Connect to an Ethernet supporting device or to your local
network, as appropriate, to extend the network to both ends of the
HDBaseT connection.