23
COMMAND
Description and Parameters
set out A name N1
Set the name of the output.
N1
= {Name}
[16 characters max]
get out A name
Show the output’s current name.
set out A route N1
Switch the output routing source to input
N1
.
N1
= 1 ~ 3
[Input number]
get out A route
Show the output’s current routing source.
get in type list
Show each input’s video type.
get out type list
Show the video type of the output.
set out A mask N1
Enable or disable the mask setting on output
N1
.
Available values for
N1
:
OFF
[Mask disabled]
ON
[Mask enabled]
Note: When an output is masked, all video, including the banner, will be
blanked out.
get out A mask
Display the current output mask setting.
Summary of Contents for PUV-1630TXWP
Page 2: ......