11
2
IR IN: Connect to the provided IR Extender to extend the IR control
range of remotely located devices. Ensure that the remote being used
is within direct line-of-sight of the IR Extender.
3
IR OUT: Connect to the provided IR Blaster to transmit IR signals to
devices within direct line-of-sight of the IR Blaster.
4
RS-232: Connect to a PC, laptop or other serial control device with a
3-pin adapter cable for the extension of RS-232 signals to the Receiver.
For receiving commands from the Receiver side, depending on your
equipment’s pinout, the Tx and Rx pins might need to be reversed.
5
CAT5e/6/7 OUT: Connect to a compatible Receiver unit with a single
Cat.5e/6/7 cable for transmission of all data signals. The output
resolution can be different from the resolution selected for the HDMI
output. A test pattern can also be displayed. 48V PoH will be provided
to compatible Receivers only.
6
HDMI OUT: Connect to HDMI TVs, monitors or amplifiers for digital
video and audio output. The output resolution can be different from
the resolution selected for the HDBaseT output. A test pattern can also
be displayed.
7
AUDIO OUT: Connect to powered speakers, an audio amplifier,
mixer, or DSP for balanced stereo analog output extracted from an
HDMI or OAR source with LPCM 2.0 audio. (Follows balanced audio
specifications.)
8
HDMI IN: Connect to HDMI source equipment such as a media player,
game console or set-top box.
9
DC 24V: Plug the 24V DC power adapter into the unit and connect it
to an AC wall outlet for power.
Summary of Contents for PUV-1550S-RX
Page 2: ......