9
6.2 Rear Panel
AUDIO OUT
LAN
CAT5e/6/7 IN
OUT
IN
HDMI OUT
RS-232
IR
DC 5V
L
R
+
+
-
-
1
2
3
4
5
6
7
8
1
CAT5e/6/7 IN:
Connect to a compatible HDBaseT Transmitter with a
single Cat.5e/6/7 cable for transmission of all data signals.
2
IR IN:
Connect to the provided IR Extender to extend the IR control
range of devices connected to the other end of the HDBaseT
connection. Ensure that the remote being used is within direct line-of-
sight of the IR Extender.
3
IR OUT:
Connect to the provided IR Blaster to transmit IR signals from
the other end of the HDBaseT connection to devices within direct line-
of-sight of the IR Blaster.
4
RS-232:
Connect to a PC, laptop or other serial control device for the
extension of RS-232 signals.
5
HDMI OUT:
Connect to an HDMI TV, monitor or amplifier for digital
video and audio output.
6
AUDIO OUT:
Connect to powered speakers or an amplifier for
balanced stereo analogue audio output.
7
LAN:
Connect to an Ethernet supporting device or to your local
network, as appropriate, to extend the network to both ends of the
HDBaseT connection.
8
DC 5V:
Plug the 5V DC power adapter into the unit and connect it to
an AC wall outlet for power. (Optional)
Note: This unit can be powered completely via HDBaseT if connected to a
compatible 48V PoH PSE (Power Supplying Equipment) Transmitter. Use
of the 5V DC power adapter is optional in that case.
Summary of Contents for PUV-1540S-RX
Page 2: ......