
9
6.2 Rear Panel
POWER
LINK
RS-232 IN
STD UPDATE
LAN
6
7
8
10
9
1
STD/UPDATE Switch:
This switch is reserved for factory use only.
2
RS-232 IN:
Connect to a PC or Laptop with D-Sub 9-pin male cable for
the transmission of RS-232 commands.
3
LAN:
Connect to an internet or network system.
4
POWER LED:
This LED will illuminate when the device is connected to
a power supply.
5
LINK LED:
This LED will illuminate when both the input source and
output display signals are connected through CAT cable. When it
blinks regularly it states the display is NOT sending signals to Receiver
but the Transmitter and Receiver are linked and if it blinks irregularly it
indicates an error has occurred.
Summary of Contents for PUV-1510TX
Page 2: ......