24
6.7 RS-232 and Telnet Commands
COMMAND
DESCRIPTION AND PARAMETERS
?
Show the full command list.
help
Show the full command list.
set factory default
Reset the unit to the factory defaults.
set system reboot
Reboot the unit.
get fw ver
Show the unit's current firmware version.
set in N1 name N2
Set the name of the specified input.
N1
= 1 ~ 4
[Input port]
N2
= {Name}
[8 characters max]
get in N1 name
Show the current name of the specified
input.
N1
= 1 ~ 4
[Input port]
get in name list
List the names of all inputs on the unit.
set out A name N1
Set the name of the output.
N1
= {Name}
[8 characters max]
get out A name
Show the current name of the output.
set out A route N1
Route the specified input to the output.
N1
= 1 ~ 4
[Input port]
get out A route
Show the current input routed to the
output.
set out A mask N1
Enable or disable the A/V Mask setting on
the output.
Available values for
N1
:
ON
[Output muted]
OFF
[Normal output]