CYP PU-USB-AL, Operation Manual, Page: 8 / 16

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
LAN RX LINK
TX POWER
3 2 1 SELECT
PU-USB-AL-KIT
2 5 1 3 4
1
SELECT Button: Press this button to manually toggle the unit
between Tx and Rx mode.
Note: The connected transceiver device will also change modes.
2
USB 2.0 (Type A) Device Ports: Connect directly to standard USB
devices such as a mouse, keyboard or flash drive to extend their USB
functionality to the currently active USB Host Port.
Note: These ports are always active, regardless of Tx/Rx mode.
3 USB 2.0 (Mini B) Host Port:
Connect directly to a USB host such
as a PC or laptop to extend their USB functionality to all currently
connected USB devices.
Note: This port is only active when the unit is in Rx mode. Connecting a
live host to a unit that is in Tx mode will automatically switch the unit to
Rx mode.
4 LAN Port:
Connect to an Ethernet supporting device or to your local
network, as appropriate, to extend the network to all LAN ports at
both ends of the HDBaseT connection.
5 Status LED Block:
TX LED:
This LED will illuminate solidly when unit is in Tx mode.
RX LED:
This LED will illuminate solidly when unit is in Rx mode.
POWER LED:
This LED will illuminate to indicate the unit is on and
receiving power.
LINK LED:
This LED will illuminate solidly when a live connection with
a compatible receiver is active.