5.2 Rear Panel
Page 5
4. System reset function: It is suggested that this function is switched OFF,
except when doing system reset. By switching this ON the system will
reset TV to HDMI Input within 8~10 minutes. Switching to OFF means CEC
bypass.
Note: The system reset function will only operate when the display has built-in CEC functionality.
5. Video/DDC input: These slots are for connecting the Video/DDC input to the
Video/DDC output of the transmitter unit with CAT6 cables..
6. Video/DDC output: These slots are for connecting the Video/DDC output to
the Video/DDC input of the receiver unit with CAT6 cables.
Note:
• Cable tested with CAT-6E / 23AWG / Solid and therefore, cable with different specification may result
in different distance.
• Cable distance tested with equipment PS3 40G, and 37” SamSung 12 bit LCD TV.
• Figures provided in this manual are reference figures only, actual figures may depend on source and
display use with cable specification.
7. HDMI Outputs 2~4: These slots allow you connect to the HDMI displays with
HDMI cables. When more than one output is connected, the HDMI outputs
play an identical video signal simultaneously.
8. Power: This slot is to plug the 5VDC power supply included in the package into
the unit and connect the adaptor to an AC wall outlet.
5.2 Rear Panel cont’d
