8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter
HDMI IN
LAN
POWER
LINK
IR 2
EXTENDER
IR 1
BLASTER
DC 24V
RS-232
IN
1
2
3
4
5
6
7
8
1
IR 2 EXTENDER:
Connect to the supplied IR Extender cables for IR
signal reception. Ensure that remote being used is within the direct
line-of-sight of the IR Extender.
2
DC 24V:
Connect the power adaptor included in the package
and then connect to AC power to activate the device.
3
IR 1 BLASTER:
Connect to the supplied IR Blaster cable for IR
signal transmission. Place the IR Blaster in direct line of sight of the
equipment to be controlled.
4
RS-232 IN:
Connect to a PC or Laptop with D-Sub 9 pin male cable for
the transmission of RS-232 commands.
5
LAN:
Connect to an internet or network connection.
When the Transmitter or any compatible LAN equipped Receivers are
connected to a network, this allows the network access (including
internet access if available) to be shared between the Transmitter and
all connected Receivers. Connect any Ethernet equipped device e.g.
a Smart TV or games console to the LAN port of a receiver for that
device to share the network/internet access
.