8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Receiver
HDMI OUT
LAN
POWER
LINK
IR 1
EXTENDER
IR 2
BLASTER
DC 24V
RS-232
OUT
1
2
3
4
5
6
7
8
1
IR 1 EXTENDER:
Connect to the supplied IR Extender cables for IR
signal reception. Ensure that remote being used is within the direct
line-of-sight of the IR Extender.
2
DC 24V:
The device can get power supply from the transmitter side
and or use its own power supply by plug the 24V DC power supply
into the unit and connect the adaptor to an AC outlet.
3
IR 2 BLASTER:
Connect to the supplied IR Blaster cable for IR
signal transmission. Place the IR Blaster in direct line of sight of the
equipment to be controlled.
4
RS-232 OUT:
This slot is to connect with D-Sub 9-pin female cable
from device equipment for receiving RS-232 commands.
5
LAN:
Connect to an active network or internet service.
When the Transmitter or any compatible LAN equipped Receivers are
connected to a network, this allows the network access (including
internet access if available) to be shared between the Transmitter and
all connected Receivers. Connect any Ethernet equipped device e.g.
a Smart TV or games console to the LAN port of a Receiver for that
device to share the network/internet access.
Summary of Contents for PU-607BDWP-RX
Page 2: ......
