CYP PU-513L-KIT, Operation Manual, Page: 8 / 16

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
CAT5 e/6 OUT
HDMI IN RS232 IN IR OUT
LINK
DC 5V
HDMI to CA
T5e/6 with
IR/RS232
TRANSMIT
TE
R
CAT5e/6 OUT
HDMI IN RS232 IN IR OUT
LINK
DC 5V
HDMI to CA
T5e/6 with
IR/RS232
TRANSMIT
TE
R
4 5 1 2 3
1
IR OUT
Connect to the supplied IR blaster for IR signal transmission to the source
equipment. Place the IR blaster in direct line-of-sight of the equipment
to be controlled.
2
HDMI IN
Connect to the HDMI input source devices such as a DVD player or a Set-
top Box with HDMI cable or DVI to HDMI cable.
3
RS 232 IN
Connect the 3.5mm mini-jack to D-Sub 9-pin female adaptor cable
(included in the package) to a PC or control system with D-Sub 9-pin
cable for the transmission of RS-232 commands.
4
DC 5V
Plug the 5V DC power supply into the unit and connect the adaptor to
an AC outlet.
5
CAT5e/6/7 OUT
Connect to the receiver unit with a single CAT5e/6 /7cable for
transmission of all data signals. The yellow LED will illuminate when
both the transmitter and receiver are connected and are powered. The
green LED will illuminate when the device is connected to the power
supply.