CYP PU-507-KIT, Operation Manual, Page: 6 / 11

3
7. Operation Controls and Functions
7.1 Front Panel
Transmitter Receiver
①.
HDMI In/Out: These slots are to connect with HDMI source equipment
such as DVD/Blu-ray player and HDMI TV/monitor with HDMI cables.
②.
LAN: These slots are to connect with RJ-45 cable from the internet or
intranet system to PC/NB device for online signal sending over CAT5e/6
③
. RS-232 In/Out: These slots are to connect with D-Sub 9pin cable from PC/
NB for RS-232 control and signal sending to the control device.
7.2 Rear Panel
Transmitter Receiver
①.
Power LED: This green LED will illuminate when the device is attached with
power supply.
②.
DC 24V: This slot is where you plug the 24V DC power into the unit and
connect the adaptor to an AC outlet.
③.
IR 1/2 Blaster: These slots are to connect with the IR blaster cable included
in the package for IR signal transmitting.
④
. IR 1/2 Extender: These slots are to connect with the IR receiver cable
included in the package for IR signal receiving.
⑤.
Link LED: This green LED will illuminate when the signal is detected from the
other end of the device.
⑥
. CAT5e/6 Out/In: These slots are to be connected with a single CAT5e/6
cable for data transmitting.
① ② ③ ③ ② ①
① ③ ⑤ ③ ④ ② ① ④ ⑤ ⑥ ⑥