8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
SERVICE
POWER
PRO-F12TX
2
1
1
SERVICE:
This slot is reserved for firmware update use only.
2
POWER LED:
This LED will illuminate to indicate the unit is on and
receiving power.
6.2 Rear Panel
OUT
DC 5V
RS-232
CONTROL
FIBER A
HDMI 1
HDMI B
3
2
1
4
5
1
FIBER A & HDMI B OUT:
Connect the HDMI output to an HDMI TV,
monitor or amplifier for digital video and audio output. Connect
the fiber (paired LC) output to the fiber input on a compatible fiber
Receiver or Transceiver unit.
Note: HDMI sources with bandwidth higher than 10.2Gbps are
automatically chroma and/or bit-depth subsampled for transmission
over the fiber output.
2
HDMI IN:
Connect to HDMI source equipment such as a media player,
game console or set-top box. DVI sources are supported with the use
of an HDMI to DVI adapter.
3
CONTROL:
Connect directly, or through a network switch, to your PC/
laptop to control the unit via Telnet/WebGUI.
4
RS-232:
Connect, via the provided 9-pin adapter cable, to a PC, laptop
or other serial control device to send RS-232 commands to control the
unit.
5
DC 5V:
Plug the 5V DC power adapter into the unit and connect it to
an AC wall outlet for power.