CYP MED-AS402, Operation Manual

Page: 5 / 36

9. Classification:
1). Supply Class I adapter
2). No applied part
3). Continuous Operation
4). Not AP or APG category
Warning!
This device is not suitable for use in the presence of
flammable anesthetic mixture with air, oxygen, nitrous
oxide, or for life support systems.
10. Environmental protection: follow national requirements to dispose
of unit.
11. Maintenance: to properly maintain and clean the surfaces, use
only the approved products or clean with a dry applicator.
Caution! When servicing the device, always use replacement parts
that are qualified to Cypress standards. Cypress cannot
war-rant or endorse the safe performance of third-party
replacement parts for use with our medical device.
12. Make sure the user does not allow contact between SIP/SOPs and
the patient at the same time.
13. When networking with electrical devices, the operator is
responsible for ensuring that the resulting system meets the
requirements set forth by the following standards:
- EN 60601-1 (IEC 60601-1)
Medical electrical equipment
Part 1: General requirements for safety
- EN 60601-1-1 (IEC 60601-1-1)
Medical electrical equipment
Part 1-1: General requirements for safety
Collateral standard: Safety requirements for Medical electrical
systems