CYP MA-U42, Operation Manual

Page: 20 / 60

15
6.4.4 Audio Select Tab
This tab provides control over which audio is routed to Output A and the
analogue audio outputs as well as providing control over audio mixing,
analogue I/O volume and the microphone’s phantom power voltage.
Note: HDMI output B’s audio is always a direct pass-through from the selected
source and is not affected by the controls on this tab.
1) Audio Select: T
he audio routed to Output A and the analogue
audio outputs is selected in this section. All changes are enacted
immediately.
„
Set Audio Mode:
Select the preferred audio content to output.
Note: When mixer mode is enabled, the selected source will be mixed with
the microphone’s audio.