6. Installation
6.1 Front Panel
①
Remote control sensor.
②
Input select indicators: Press the “INPUT” button repeatedly to switch to
your desired input source. The LED that illuminates indicate the
corresponding input source is selected.
③
CEC button indicator: When the LED illuminate it means CEC is ON. Press
again to switch CEC to bypass mode and the LED will not illuminate
which means the CEC function will be terminate.
Note: Both input source and output display must support CEC function for
the switcher to properly perform CEC.
④
POWER indicator: When power is connected to the device,
the device automatically turns on and the power LED will turn red.
Note: To turn ON or switch the device to standby mode, please press the
"POWER" button on the remote control unit.
1
2
3
4
EL-C41C
4x1 HDMI v1.3 Switcher with CEC
INPUT
CEC
ON/Bypass POWER
①
②
③
④
3
