34
Mixer:
Set the microphone mixing mode of the unit.
- Off: Disable the audio mixer.
- On: Enable the audio mixer. Audio from the current source and
the microphone will be mixed together.
- MIC Only: Output only the microphone audio source. This mode
will override all other audio selections.
Mic Volume:
Sets the microphone input’s volume level when the
microphone is an active audio source (mixed or unmixed).
HDMI/HDBT Volume:
Set the volume level for the HDMI and
HDBaseT audio output.
Analogue Volume:
Set the volume level for the line output.
HDMI/HDBT Mute:
Mute or unmute the HDMI and HDBaseT audio
output.
Analogue Mute:
Mute or unmute the line audio output.
HDMI/HDBT Delay:
Use the dropdown to set the amount of time (in
milliseconds) to the delay the audio output. Primarily used if audio
and video seem to be out of sync.
Note: LPCM 2.0 sources only.
Analogue Delay:
Use the dropdown to set the amount of time (in
milliseconds) to the delay the audio output. Primarily used if audio
and video seem to be out of sync.
HDMI 1/HDMI2/USB-C/VGA1/VGA2 Audio Routing:
Use each
dropdown to set the preferred audio routing to use for each source
when “Follow User” is selected.
Talk Over:
Use the dropdown to enable or disable the use of the
unit’s Talk Over mode which allows finer control over how the
microphone input is handled while mixing sources.
Note: When Talk Over mode is disabled, or the mixer is disabled, the
below settings will have no effect.
Depth(%):
Sets the amount the primary audio source’s volume
level will be decreased when the Talk Over feature is triggered. The
available adjustment range is 0 to 100%.
Threshold(dB):
Set the microphone’s signal detection threshold.
The Talk Over will be activated when the microphone’s signal is over
the threshold and lasting longer than the trigger time. The available
adjustment range is -100dB to 0dB.
Summary of Contents for EL-8100V
Page 2: ......
