CYP EL-7400V, Operation Manual

Page: 8 / 64

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1 1 2 2
POWER DP HDMI VGA
MENU –
+
ENTER
720P
XGA
EL-7400V
1 2 3 4 5 6
1
POWER Button & LED: Press this button to power the unit on (Green
LED) or place it into stand-by mode (Red LED).
2 IR Window:
Accepts IR signals from the included IR remote for control
of this unit only.
3 DP/HDMI/VGA Buttons & LEDs:
Press any of these buttons to switch
immediately to the corresponding input. An LED will illuminate to
indicate which source is currently selected.
4 MENU Button:
Press to enter the OSD menu, or to back out from
menu items.
Note: Pressing and holding the “MENU” button while connecting the
power supply will reset all settings to the factory defaults. Pressing
“MENU” and “+” together will reset the output resolution to XGA
(1024×768@60Hz). Pressing “Menu” and “−” together will reset the output
resolution to 720p@60Hz.
5 − & + Buttons:
Press to move up and down or adjust selections within
menus.
Note: When not in the OSD, pressing “−” will activate the Auto Adjust
function for VGA sources. Pressing “+” will briefly show the OSD
information display.
6 ENTER Button:
Press to confirm a selection within the OSD or to go
deeper into a menu item.