7. Operation Controls and Functions
7.1 Front Panel
①
②
③
④
⑤
⑥
HDMI IN AUDIO IN
PC IN
RS 232 IN
RS 232 OUT
IR IN
DS-MSC Video Wall Controller
①
HDMI IN: This slot is to connect from HDMI splitter or matrix with input
source signal.
②
Audio IN: This slot is to connect with the audio signal from the source
equipment with 3.5Ø phone jack.
③
PC IN: This slot is to connect from PC/RGB splitter or matrix with input
source signal.
④
RS-232 IN: As a first device of the video wall system, this slot is to connect
with PC/NB equipment for RS-232 control. Starting from the second device
of the video wall system this slot should be connect from the RS-232 out of
the last device.
Note: For RS-232 control it required a special level-shift board and it is an
optional accessory selection.
⑤
RS-232 OUT: This slot is to connect to the next video wall control system’s
RS-232 IN.
⑥
IR IN: This slot is to connect with IR blaster included in the package for
receiving the IR signal of the device’ remote controller.
7.2 Rear Panel
②
③
①
HDMI OUT
DC 5V
AUDIO OUT
L
R
①
DC 5V: Connect this slot with power adaptor included in the package
from the AC wall outlet. When the power is plugged on the device will
automatically power ON.
②
Audio OUT L/F: These slots are to connect with RCA jack cables to the
active speaker or to display’s audio input.
③
HDMI OUT: This slot is to connect to the display with HDMI input.
4
