6
Audio-In:
Select this to capture audio from the analog audio input.
Mixer:
Select this to activate the audio mixer and capture audio from
it. When the audio mixer is enabled, the currently selected HDMI audio
source will be mixed with the analog audio input.
2) Audio setting:
This section provides control over audio capture
recording levels.
Volume (In):
Adjust this slider to control the volume level of the analog
audio input when the mixer function is enabled.
Volume (Out):
Adjust this slider to control the overall volume level of
captured audio.
MIC Mode:
Click this button to enable or disable the microphone audio
boost on the analog audio input.
Note: This should only be enabled when an unpowered microphone
source is connected. Activating this when a line-level source is
connected could result in heavily distorted audio.
Mute Audio:
Click on this button to mute or unmute the audio being
captured.
3) Video Setting:
This section provides direct control over a variety of video
settings that are applied when video capture is active.
Note: Changes to these settings have no impact on the HDMI bypass
output signal.
Brightness:
Provides control over the overall brightness of the
captured video.
Contrast:
Provides control over the overall contrast of the captured
video.
Hue:
Provides control over the hue shift of the captured video.
Saturation:
Provides control over the color saturation level of the
captured video.
Sharpness:
Provides control over the amount of sharpness
processing to apply to the captured video.
Reset Video Setting:
Click this button to reset all video settings.
4) Reset All to Default:
Click this button to reset the unit to its factory
default state.