3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
CSLUX-300 DIGITAL VIDEO SCALER
XGA
720P
MENU
-
+
ENTER
POWER
INPUT
CV
SV
COMP
PC
HDMI 1
HDMI 2
IR
1
2
3
4
5
6
1
POWER Button & LED:
Press this button to switch the device ON
or to put the device into STANDBY mode. When the device is
connected to an active power supply, the LED will illuminate and
the device will switch ON automatically.
2
IR Receiver Window:
Receives only the IR signal from the supplied
remote control.
3
INPUT Button & LEDs:
Press to repeatedly select the required input.
An LED will illuminate to indicate the currently selected source.
4
MENU Button:
Press this button to enter into the on-screen menu
(OSD).
5
Minus/Plus (-/+) Buttons:
Use these buttons to navigate down and
up in the on-screen menu.
6
ENTER Button:
Press this button to confirm the selection.
Note: Pressing '−' (MINUS) and ENTER simultaneously will
immediately switch the output resolution of the device to 720p60.
Pressing '+' (PLUS) and ENTER simultaneously will immediately switch
the output resolution of the device to XGA.
