CYP CSDI-12SR, Operation Manual

Page: 8 / 20

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
720p
1080p
MENU SYNC POWER SERVICE ENTER - +
1 2 3 4 5 6
1
SERVICE: Connect to a PC or Laptop with a mini USB B cable for
firmware update only.
2
POWER LED: The LED will illuminate when the unit is connected to
an active power supply.
3
SYNC LED: The LED will illuminate when the SDI input is connected
to and detects an SDI source.
4
MENU: Press to bring up the OSD menu. When in OSD menu mode,
the 'MENU' button will function as the 'EXIT' button.
Press the 'MENU' and 'MINUS (-)' buttons simultaneously will
immediately switch the output resolution to 720p@60 Hz.
5
ENTER: Press to confirm the selection in the OSD menu.
Press the 'ENTER' and 'PLUS (+)' buttons will immediately switch the
output resolution to 1080p@60 Hz.
6
MINUS (-)/PLUS (+): Press these buttons to navigate up or down the
OSD menu.
When in normal display mode (not in OSD menu), press the 'PLUS (+)'
button to 'FREEZE' (pause) the video (Please refer to the section 6.3).