CYP CSC-V101P, Operation Manual

Page: 8 / 20

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
MENU
VGA HDMI IN POWER
– +
ENTER
720P SERVICE
XGA
1 2 3 4 5 6 7
1
POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
2
IN & LEDs: Press this button to switch between the HDMI and VGA
inputs. The LED will illuminate to indicate which source is currently
selected.
3
MENU: Press to enter the OSD menu, or to back out from menu
items.
Note: Pressing “MENU” and “+” together will reset the output
resolution to XGA (1024×768@60Hz). Pressing “Menu” and “-”
together will reset the output resolution to 720p@60Hz.
4
- (Minus): Press to move down or adjust selections within OSD
menus.
Note: When not in the OSD press “-” to activate the “Auto Adjust”
function (VGA sources only).
5
+ (Plus): Press to move up or adjust selections within OSD menus.
6
ENTER: Press to confirm a selection within the OSD or to go deeper
into a menu item.
7
SERVICE: This slot is reserved for firmware update use only.