CYP CSC-6030HB, Operation Manual

Page: 41 / 80

36
6.6.7 System Tab
Click on the “System” tab to make changes to various system settings.
From this tab you can change the WebGUI login username and
password as well as configure the RS-232/IR HDBaseT routing. Finally,
this tab provides buttons to reset the unit to factory defaults and to
update the firmware.
1) Web User Setting: This section allows for the login password to be
changed.
Note: The default user name and password is “admin”.
2) Network: IP mode may be switched between Static IP or DHCP.
In Static IP mode the IP, netmask and gateway addresses may
be manually set. When in DHCP mode, the unit will attempt to
connect to a local DHCP server and obtain IP, netmask and
gateway addresses automatically. Please press “Save” after
making any changes to the IP configuration or mode.
Note: If the IP address is changed then the IP address required for
WebGUI/Telnet access will also change accordingly.