CYP CSC-200P, User Manual

Page: 8 / 12

9 6
(6). Remote Control
1. Power: Power ON/OFF button.
2. Display: Press the button to enable or disable the on screen display
of the resolution information.
3. C-Video: Press the button to select composite video as input source.
4. S-Video: Press the button to select S-Video as input source.
5. YCbCr: Press the button to select YCbCr as input source.
6. PC: Press the button to select PC input looping through to the output.
7. VGA: Press the button to select 640 x 480 as output resolution.
8. SVGA: Press the button to select 800 x 600 as output resolution.
9. XGA: Press the button to select 1024 x 768 as output resolution.
10. SXGA: Press the button to select 1280 x 1024 as output resolution.
11. 480p: Press the button to select 852 x 480p as output resolution.
12. 576p: Press the button to select 852 x 576p as output resolution.
13. 720p: Press the button to select 1280 x 720p as output resolution.
14. 1080i: Press the button to select 1920 x 1080i (interaced) as output resolution.
15. Aspect ratio: Press the button to switch between standard, 4:3 and
wide (16:9)aspect ratio.
16 IR-Set: When IR sensor is turned off by RS-232, Press this button for
over 15 seconds will turn on the IR sensor.
17. 3D: Press to turn ON/OFF the 3D enhance.
18. NR: Press to turn ON/OFF digital noise reduction.
19. Mode: Same as "mode" button on front panel.
press to toggle through
Source

Resolution

Output

Aspect

3D Enhance

Digital NR

Source
20. Picture: Same as picture button on
front panel. Press to toggle
through Contrast

Bright

Color

Tint

Sharpness

Contrast
21. Reset: Press this button will revert picture
adjust back to factory preset value.
2 9 11 1
3
4
5
6
7
8
10
13
12
16
17
19
18
20
21
15
14