10
VIDEO
2ND LEVEL
3RD LEVEL
4TH LEVEL
Bypass Output
Bypass Color
RGB
YUV444
YUV422
1) Video (Output B only):
Selects the HDMI input to route to the
scaled output (Output B) for display.
2) Output (Output B only):
Selects the output resolution to use on the
scaled output. Selecting “Native” will make the unit automatically
select an output resolution based on the detected EDID of the
connected display.
3) Aspect (Output B only):
Selects the aspect ratio to use when
outputting a source on the scaled output. “Full” stretches the
source to fill the output resolution, regardless of the original aspect
ratio, while “Best Fit” will always attempt to retain the original
source’s correct aspect ratio by adding black bars if necessary.
“Follow In” centers the source on the screen, without any scaling
(1:1 pixel reproduction). Selecting “Zoom Mode” activates the
free-scaling zoom mode which allows for a zoom/shrink level to be
manually selected using the “Zoom Mode Ratio” setting.
Note: Some video noise might be present when using the “Follow
In” mode if the selected output resolution is 4096×2160@60Hz and
the source is at, or above, 1680×1050 but below 3840×2160.
4) Zoom Mode Ratio (Output B only):
Sets the percentage amount to
zoom or shrink the image when the “Zoom Mode” aspect option is
active.
5) HDMI1~4 HDCP:
Selects the HDCP logic to use with the specified
HDMI input. Setting this to “Support Off” will completely disable
HDCP support on that input.
6) No Signal Color:
Selects the free run color to use when no live input
source is detected.
7) Blank (Output B only):
Allows for the video and audio on the
scaled output to be blanked/muted.
