23
6.9 WebGUI Control
Please enter the IP address displayed on the “Ethernet Settings” menu
of the OSD into a web browser to connect to the scaler’s WebGUI.
The WebGUI is divided up into multiple sections (Input, Lock,
Information, Display, Picture, Audio, Miscellany, and Factory) allowing
for all functions of the unit to be viewed and controlled directly. If
desired, the numerical value for many of the items can be entered
directly by typing it in the box above the slider bar. Press “Enter” to
accept the newly entered value.
•
INPUT:
This section allows for control of input selection with a choice
between HDMI1, HDMI2, DP, PC1, and PC2. Once a selection is
made, the switch will occur immediately.
• LOCK:
This section provides a way to turn the front panel lock on
and off.
• INFORMATION:
This section provides details about the current input
and output signals, as well as the firmware version of the unit.
•
DISPLAY:
This section allows for control of the output resolution, size
(aspect ratio), and HDCP behavior for all 3 digital inputs on the unit.
There are also controls for the signal type expected by each PC
input. Enabling "Comp In" for a PC input allows YUV (component
