2
3. Operation Controls and Functions
The following sections describe the hardware components of the unit.
3.1 Front Panel
1 IR sender.
2 Colorbar: The color bar test pattern can test each key function.
3 Output: Press to select output mode.
4 TV system: Press to select video output system.
5 ▲ and ▼: Press to toggle through various control or setting values.
6 Mode: Press the button continuously to toggle through the following selection:
Press “MODE” button to select each item.
Press ▲ and ▼ to select sub-item.
Output mode: Overlay, Video input, Mixer, PC input.
TV system: NTSC, NTSC4.43, PAL, PAL-M, PAL-N, SECAM.
Overlay mode: Blue key, Green Key, Red key, Black key.
PC Zoom: Off, Position1 to Position 9.
7 Adjust: Press the button continuously to toggle through picture selection mode.
There are Contrast, Bright, Color, Hue, Detail, Flick, H size, V size, H Position, V
Position, Phase and Level. Each level is from 0 to 63 and the factory defaults
value is 31 excepted Contrast and Detail values. The Contrast factory default
value is 58 and Detail factory default value is 10.
Press “ADJUST” button to select each items.
Press ▲ and ▼ to adjust each item levels.
[Note]: Above functions are only works for PC input.
8 Power: Press to power on the system and press again to turn off.
9 Power LED indicator: The LED will illuminate when power on.
10 LCD display.
5
4
1
2
9
10
7
3
6
8
▲
MODE
OUTPUT
▼
POWER
ADJUST
TV
SYSTEM
COLORBAR