4
6.2 Rear Panel
DC 5V
HDMI IN
1
2
RS-232
HDMI OUT
1
2
1
2
1
2
3
4
ETHERNE
T
SPDIF/ARC
OU
T
1
2
3
4
1
RS-232
This slot is to connect with a PC or control system with D-sub 9pin
cable for RS-232 control. For detail RS-232 commands please refer
to Section 6.4.
2
HDMI OUT 1~2/ARC 1~2/ETHERNET 1~2
HDMI/HEAC equipped TVs or displays will pass the Ethernet and
Audio signals via HDMI v1.4 cable back to the HDMI Output port,
the splitter will separate the Ethernet and audio, and will output
audio from the ARC and bi-directional data streams through the
Ethernet ports. If the display has a built-in tuner or an attached
DVD player, audio content can be sent “upstream” from the TV
back to the audio system to be output in multi-channel audio.
The HDMI Switcher can use the HDMI Ethernet Channel (HEC) to
consolidate video, audio and data streams into a single HDMI
cable connection to an Ethernet Hub/modem in order to access
the internet and also incorporates a dedicated data channel
into the HDMI link, enabling high-speed, bi-directional networking
at up to 100 Mb to control and search from the sink (please see
Section 6 for connection diagram). The HDMI output number is
correspondingto ARC and Ethernet output number.
Note 1: Be sure to connect devices with a suitable HDMI cable
designed to support the Ethernet Channel functionality, either the
standard HDMI cable with Ethernet or High Speed HDMI cable with
Ethernet.
