CYP CPLUS-V4H4H, Operation Manual

Page: 25 / 32

20
Network:
The unit’s IP mode (DHCP or Static IP), IP address, netmask, and
gateway can be set here. When the unit is set to “DHCP” mode, it
will automatically attempt to obtain proper configuration information
from the local DHCP server. If no DHCP server is available, or the user
wishes to configure the network settings manually, please set the unit
to “Static IP” mode and enter the information as appropriate for your
local network. Press “Save” to activate the changes.
Reset to Default:
To reset all routing settings press the “Routing Reset” button. To reset
the entire unit to the factory defaults please press the “Factory Reset”
button.
Firmware Upgrade:
To update the firmware of the unit, press the “Choose File” button to
select a new firmware file that is stored on your local PC. After an ap -
propriate file has been selected, press the “Upgrade” button to begin
the firmware update process.